Building applications Save energy Energy stocks are valuable and limited. Fuel prices are high. The InfraCAM easily detects building anomalies that result into energy losses. Locate the areas, repair them and save money. Inspect buildings rapidly The InfraCAM is the perfect tool to find hidden building problems instantly. Inspect constructions, repair them immediately if necessary and check afterwards whether the problem is solved. Verify if external contractors have done a proper job. Scan buildings quickly before they are surrendered to the owner. You will see all problem areas on the InfraCAM’s 3.5” LCD display. Improve building quality The building industry is faced with new materials. Shorter construction times are demanded. Efficient planning, supervision and documentation with regards to air tightness and thermal insulation are demanded. Unhealthy situations due to moist need to be avoided. The InfraCAM can provide you with important information so that costly repair work can be avoided. Furthermore, to a building owner or insurance company involved in property damage settlement, the InfraCAM can deliver valuable information to plan the restoration effort or to rationalize settlements. Locate it fast – avoid problems See badly insulated areas which result in energy losses. Supervise and check the quality of new constructions. Locate hidden pipes and avoid damage. Identify air leaks. Detect leaks and minimize repair costs. Find areas susceptible to, sometimes dangerous, mold build-up. Discover leaks in flat roofs. See if a building is dry. Use the InfraCAM to detect the problem and repair it. See temperatures The InfraCAM allows you to measure the temperature of any object you are looking at in a non-contact mode. A crosshair in the middle of the thermal image allows you to measure and analyze the temperature at a single point. Detect the most diverse building problems instantaneously by seeing them on a thermal image. Document your work InfraCAM stores 50 images in JPEG format. Insert the images in your favorite program and show others where the problem was located and that it has been repaired. The InfraCAM comes standard with ThermaCAM QuickView™ software which allows post-analysis of the infrared images. Changing color palettes, moving temperature measurement spots, adjusting level and span... it can easily be done in ThermaCAM QuickView. |
 |
 |
The thermal image shows a badly sealed ceiling causing cold air to leak into the building. |
|
 |
 |
With the InfraCAM it is easy to locate hidden circuits. You can measure the surface temperature, find faults and document your findings. |
|
 |
 |
The occupant complained about a cold spot in his living room. The thermogram on the right clearly identifies the source of the cold as an uninsulated part in the wall. By insulating this spot, the occupant improved comfort, saved energy and money. |
|
 |
 |
| The thermal image clearly shows moisture in a floor. Something which can not be detected by the naked eye. |
|